SYRIUS PLASMA 52 D plasma cutting machine
CUT-50
To order
Net price:
519,22 EUR
Gross price:
659,41 EUR
Product description
PLASMA 52 D uses the most advanced inverter technology.
After rectifying the 230 V mains voltage, we convert the current at 10-100 kHz instead of 50/60 Hz using IGBT or MOSFET technology, thus achieving a significant reduction in the weight and volume of the transformer and increasing efficiency by 30%.
The device provides high-frequency arc ignition. It can also be used to adjust the gas pre- and post-flow.
The advantages of the cutting machine are as follows:
Stability.
Reliability.
Lightweight design.
Energy efficiency and noiselessness.
High cutting speed
Even cutting, good cutting surface
Modern design, with plastic front panel
Can be used in a wide mains voltage range: 160V – 270V, 1 phase
Non-contact (HF) ignition with pilot arc
Digital display, pre-adjustable cutting current
Overheating, overcurrent protection
Low power consumption, economical operation
Small size, easy to carry
The cutting machine can be used in a wide range of applications; it can be used for cutting stainless steel, alloy steel, carbon steel, copper and other non-ferrous metals.
Input voltage (V)
1 phase 230 V±15%
Frequency (Hz) 50/60
Input current (A) 38.9
No-load voltage (V) 267
Output current (A) 15-50
Output voltage (V) 86-100
Duty time (%) 40
Power factor 0.73
Efficiency (%) 80
Arc ignition High frequency
Air compressor pressure (bar) 3-4.5
Nozzle inner hole diameter (mm) 1.0
Cutting thickness (mm) 1-15
Protection degree IP21S
Insulation type F
Cooling With fan
Net weight (kg) 7.3
Gross weight (kg) 11.2
Overall dimensions (mm) 375 x 160 x 310
Package size (mm) 455 x 270 x 370
After rectifying the 230 V mains voltage, we convert the current at 10-100 kHz instead of 50/60 Hz using IGBT or MOSFET technology, thus achieving a significant reduction in the weight and volume of the transformer and increasing efficiency by 30%.
The device provides high-frequency arc ignition. It can also be used to adjust the gas pre- and post-flow.
The advantages of the cutting machine are as follows:
Stability.
Reliability.
Lightweight design.
Energy efficiency and noiselessness.
High cutting speed
Even cutting, good cutting surface
Modern design, with plastic front panel
Can be used in a wide mains voltage range: 160V – 270V, 1 phase
Non-contact (HF) ignition with pilot arc
Digital display, pre-adjustable cutting current
Overheating, overcurrent protection
Low power consumption, economical operation
Small size, easy to carry
The cutting machine can be used in a wide range of applications; it can be used for cutting stainless steel, alloy steel, carbon steel, copper and other non-ferrous metals.
Input voltage (V)
1 phase 230 V±15%
Frequency (Hz) 50/60
Input current (A) 38.9
No-load voltage (V) 267
Output current (A) 15-50
Output voltage (V) 86-100
Duty time (%) 40
Power factor 0.73
Efficiency (%) 80
Arc ignition High frequency
Air compressor pressure (bar) 3-4.5
Nozzle inner hole diameter (mm) 1.0
Cutting thickness (mm) 1-15
Protection degree IP21S
Insulation type F
Cooling With fan
Net weight (kg) 7.3
Gross weight (kg) 11.2
Overall dimensions (mm) 375 x 160 x 310
Package size (mm) 455 x 270 x 370
We reserve the right to change the price (product price and delivery price)!
Image is for illustration purposes only!
If you have any questions, call us: +36 30 200 7137
