Grease AGIP / ENI, GR MU EP2, bucket, 5kg.
ENI-GRMUEP2/5
To order
Net price:
45,32 EUR
Gross price:
57,56 EUR
Product description
Agip / Eni MU EP is a special, fibrous-textured, lithium-based grease containing an EP (Extreme Pressure) additive for demanding operating conditions.
There is only a consistency difference between grades.
Typical properties
NLGI consistency grade 00 0 1 2 3
Base oil viscosity at 40 °C, mm2/s: 160 160 160 160 160. Penetration, 1/10 mm: 425 370 325 280 230.
Operating temperature range, °C: -40/ -40/ -30/ -30/ -30/
+120 +120 +130 +130 +130. ASTM dropping point, °C: 175 180 185 175 180.
Features
The EP additive in eni Grease MU EP forms a highly adhesive lubricating film, minimising metal-to-metal contact at lubrication points even under high dynamic loads. Eni Grease MU EP 2 Timken OK has a load of 45 lb and meets the following load tests: FAG FE 9 (DIN 51821-2) and SKF R2F at 120 oC.
Due to its good physical and chemical stability, its properties do not change even after long-term and heavy physical and thermal loads. Its oxidative stability is excellent for both storage and use.
It has anti-rust effect on most metals and has a particularly good adhesion on metal surfaces, has a good vibration tolerance.
Eni Grease MU EP grease is water-tolerant, so it can be used in wet media and in contact with water and well pumped at low temperatures.
eni Grease MU EP can be used at lubrication points requiring EP (extreme pressure) performance, at temperatures from -30 / -40 to +120 / +130 °C, depending on grade.
In plain bearings, for heavy-duty ball and roller bearings, it can be used at high temperatures and meets the lubrication requirements of extremely difficult operating conditions.
Specifications and approvals
eni Grease MU EP 00 0 1 2 3
CINCINNATI MILACRON P-79 P-72 P-64
ISO L-X- -DCHB-00 -DCHB-0 -CCHB-1 -CCHB-2 -CCHB-3 DIN 51 825 GP00K-40 GP0K-40 KP1K-30 KP2K-30 KP3K-30 DIN 51 826 G00K G0K G1K
There is only a consistency difference between grades.
Typical properties
NLGI consistency grade 00 0 1 2 3
Base oil viscosity at 40 °C, mm2/s: 160 160 160 160 160. Penetration, 1/10 mm: 425 370 325 280 230.
Operating temperature range, °C: -40/ -40/ -30/ -30/ -30/
+120 +120 +130 +130 +130. ASTM dropping point, °C: 175 180 185 175 180.
Features
The EP additive in eni Grease MU EP forms a highly adhesive lubricating film, minimising metal-to-metal contact at lubrication points even under high dynamic loads. Eni Grease MU EP 2 Timken OK has a load of 45 lb and meets the following load tests: FAG FE 9 (DIN 51821-2) and SKF R2F at 120 oC.
Due to its good physical and chemical stability, its properties do not change even after long-term and heavy physical and thermal loads. Its oxidative stability is excellent for both storage and use.
It has anti-rust effect on most metals and has a particularly good adhesion on metal surfaces, has a good vibration tolerance.
Eni Grease MU EP grease is water-tolerant, so it can be used in wet media and in contact with water and well pumped at low temperatures.
eni Grease MU EP can be used at lubrication points requiring EP (extreme pressure) performance, at temperatures from -30 / -40 to +120 / +130 °C, depending on grade.
In plain bearings, for heavy-duty ball and roller bearings, it can be used at high temperatures and meets the lubrication requirements of extremely difficult operating conditions.
Specifications and approvals
eni Grease MU EP 00 0 1 2 3
CINCINNATI MILACRON P-79 P-72 P-64
ISO L-X- -DCHB-00 -DCHB-0 -CCHB-1 -CCHB-2 -CCHB-3 DIN 51 825 GP00K-40 GP0K-40 KP1K-30 KP2K-30 KP3K-30 DIN 51 826 G00K G0K G1K
We reserve the right to change the price (product price and delivery price)!
Image is for illustration purposes only!
If you have any questions, call us: +36 30 200 7137
